Skip Navigation

Publication Detail

Title: "Floating" cathode for efficient H2O2 electrogeneration applied to degradation of ibuprofen as a model pollutant.

Authors: Zhou, Wei; Meng, Xiaoxiao; Rajic, Ljiljana; Xue, Yunfei; Chen, Shuai; Ding, Yani; Kou, Kaikai; Wang, Yan; Gao, Jihui; Qin, Yukun; Alshawabkeh, Akram N

Published In Electrochem commun, (2018 Nov)

Abstract: The performance of the Electro-Fenton (EF) process for contaminant degradation depends on the rate of H2O2 production at the cathode via 2-electron dissolved O2 reduction. However, the low solubility of O2 (≈1×10-3 mol dm-3) limits H2O2 production. Herein, a novel and practical strategy that enables the synergistic utilization of O2 from the bulk electrolyte and ambient air for efficient H2O2 production is proposed. Compared with a conventional "submerged" cathode, the H2O2 concentration obtained using the "floating" cathode is 4.3 and 1.5 times higher using porous graphite felt (GF) and reticulated vitreous carbon (RVC) foam electrodes, respectively. This surprising enhancement results from the formation of a three-phase interface inside the porous cathode, where the O2 from ambient air is also utilized for H2O2 production. The contribution of O2 from ambient air varies depending on the cathode material and is calculated to be 76.7% for the GF cathode and 35.6% for the RVC foam cathode. The effects of pH, current, and mixing on H2O2 production are evaluated. Finally, the EF process enhanced by the "floating" cathode degraded 78.3% of the anti-inflammatory drug ibuprofen after 120 min compared to only 25.4% using a conventional "submerged" electrode, without any increase in the cost.

PubMed ID: 30546268 Exiting the NIEHS site

MeSH Terms: No MeSH terms associated with this publication

Back
to Top