Title: CFD simulation of contaminant decay for high reynolds flow in a controlled environment.

Authors: Lambert, Andrew R; Lin, Ching-Long; Mardorf, Eunice; O'Shaughnessy, Patrick

Published In Ann Occup Hyg, (2010 Jan)

Abstract: This study examines the usage of computational fluid dynamics (CFDs) for estimating the time-elapsed decay of contaminants within a chamber experiencing high Reynolds flow. CFD results were compared with measurements taken at a controlled facility. In addition, parameters of the CFD simulation were examined; namely the effects of turbulence and inertial transport at high Reynolds number ventilating flows, as well as inlet duct configuration and its effect on the inlet velocity profile. The agreement between the computational and experimental clearance times was quite good, with percent errors as low as -5.32% at high flow rate and -11.8% at the lower flow rate. This study determined that for high Reynolds flow, diffusive transport effects may be ignored as the majority of mass is transported via the bulk stream, i.e. momentum transport. In addition, resolving the inlet velocity profile was of prime importance for accurate simulation of ventilating flows and prediction of contaminant washout. This was done by including the inlet duct geometry in the computational domain. In addition, it was found that despite different flow rates, the predicted contaminant washout took approximately 12-13% longer than predicted assuming instantaneous mixing. Furthermore, percent error between computational and experimental data as low as -5.32% shows that CFD is a useful tool for studying ventilation phenomena.

PubMed ID: 19671796

MeSH Terms: No MeSH terms associated with this publication